Samsung on Monday introduced a new “840” SSD series which reviewers have found is based on TLC flash.
Oddly enough the press release for this product seems only to have been distributed in Korea to reviewers who attended a special introduction of the device. The SSD Guy has not been given the specifications presented at the event, and had to ask Samsung for a copy of the press release.
The press release focuses on the product’s 100,000 read IOPS, that it comes in two versions, the “Pro” model for the enterprise and another model for client applications, and the fact that the controller uses a new design based on three ARM cores. A read IOPS figure of 100,000 is very high performance for a SATA drive! One has to wonder if the client market will be able to distinguish between this level of performance and drives with fewer than 10,000 IOPS.
Other specifications Continue reading “Samsung Introduces TLC SSD”
In this post we will explore how the right wear leveling algorithm can help a controller maximize the life of an SSD.
Wear leveling is a fact of life with NAND flash – blocks start to suffer bit failures after a certain number of erase/write cycles (usually specified from the thousands to the hundreds of thousands) and it is only natural that software will attempt to over-write some blocks more than others. In order to prevent this from causing failures, all of today’s SSD, USB flash drive, and flash card controllers incorporate some sort of wear leveling.
This is a simple re-mapping of the contents of the flash chips. A more graphical explanation is Continue reading “How Controllers Maximize SSD Life – Better Wear Leveling”
How do controllers maximize the life of an SSD? After all, MLC flash has a lifetime of only 10,000 erase/write cycles or fewer and that is a very small number compared to the write traffic an SSD is expected to see in a high-workload environment, especially in the enterprise. Still, MLC is becoming the norm in the enterprise.
How do they do that?
This is where SSD architects really earn their pay. There are eight basic techniques that The SSD Guy knows of to extend SSD life beyond Continue reading “How Controllers Maximize SSD Life”
SMART Storage Systems has introduced a new enterprise-class SSD that the company says: “increases the endurance of cMLC Flash to a level that makes SLC drives obsolete.” That’s a pretty hefty claim!
The new Optimus Ultra+ SSD is specified at 100K read IOPS and 60K write IOPS, through its 6Gb/s SAS interface. With capacities ranging from 100-800GB, this SSD supports up to 50 full drive writes per day (DWPD) over its 5-year lifespan, double that of the company’s Optimus Ultra which was introduced in February. That’s quite something for an MLC-based SSD.
SMART has tapped into its Guardian technology to reap SLC benefits from MLC flash through both enhanced external and internal algorithms. Like all other SSD makers and SSD controller makers SMART has focused a lot of attention on error correction, DSP, and other means of correcting errors externally to the flash. The company has also partnered with Continue reading “SMART Optimus Ultra+ SSD: SLC Performance Using MLC Flash”
SSDs vary widely in performance. This is something that becomes amazingly clear when a number of these devices are put through a battery of tests.
Calypso Systems ran the SNIA SSD Performance Test Specification (PTS), outlined in an earlier post in this blog, on seventeen SSDs and a single HDD. The results appear, in miniature, in the graphic for this post. Continue reading “Not all SSDs are Created Equal”